Ubiquitous Talk

Connecting VMware iSCSI sessions to COMSTAR or any iSCSI target provider securely is required to maintain a reliable system. Without some level of initiator to target connection gate keeping we will eventually encounter a security event. This can happen from a variety of sources, for example a non-cluster aware OS can connect to an unsecured VMware shared storage LUN and cause severe damage to it since the OS has no shared LUN access knowledge.  All to often we make assumptions that security is about confidentiality when it is actually more commonly about data availability and integrity which will both be compromised if an unintentional connection were to write on a shared LUN.

At the very minimum security level we should apply non-authenticated named initiator access grants to our targets. This low security method defines initiator to target connection states for lower security tolerant environments. This security method is applicable when confidentiality is not as important and security is maintained with the physical access control realm. As well it should also coincide with SAN fabric isolation and be strictly managed by the Virtual System or Storage Administrators. Additionally we can increase access security control by enabling CHAP authentication which is a serious improvement over named initiators. I will demonstrate both of these security methods using COMSTAR iSCSI Providers and VMware within this blog entry.

Before we dive into the configuration details lets examine how LU’s are exposed. COMSTAR controls iSCSI target access using several combined elements. One of these elements is within the COMSTAR STMF facility where we can assign membership of host and target groups. By default if we do not define a host or target group any created target will belong to an implied ALL group. This group as we would expect grants any connecting initiator membership to the ALL group assigned LUN’s. These assignments are called views in the STMF state machine and are a mapping function of the Storage Block Driver service (SBD) to the STMF IT_nexus state tables.

This means that if we were to create an initiator without assigning a host group or host/target group combination, an initiator would be allowed unrestricted connectivity to any ALL group LUN views and possibly without any authentication at all. Allowing this to occur would of course be very undesirable from a security perspective in almost all cases. Conversely if we use a target group definition then only the initiators that connect to the respective target will see the LUN views which are mapped on that target definition instance.

While target groups do not significantly improve access security it does provide a means controlling accessibility based on the definition of interface connectivity classes which in turn can be mapped out on respective VLAN priority groups, bandwidth availability and applicable path fault tolerance capabilities which are all important aspects of availability and unfortunately are seldom considered security concepts in many architectures.

Generally on most simple storage configurations the use of target groups is not a requirement. However they do provide a level of access control with LUN views. For example we can assign LUN views to a target group which in turn frees us from having to add the LUN view to each host group within shared LUN configurations like VMware stores. With combination’s of host and target groups we can create more flexible methods in respect to shared LUN visibility. With the addition of simple CHAP authentication we can more effectively insulate target groups. This is primarily due to the ability to assign separate CHAP user and password values for each target.

Lets look at this visual depiction to help see the effect of using target and host groups.

In this depiction any initiator that connects to the target group prod-tg1 will by default see the views that are mapped to that target groups interfaces. Additionally if the initiator is also a member of the host group prod-esx1 those view mapping will also be visible.

One major difference with target groups verses the all group is that you can define LU views on mass to an entire class of initiator connections e.g. a production class. This becomes an important control element in a unified media environment where the use of VLANs separates visibility. Virtual interfaces can be created at the storage server and attached to VLANs respectively. Target groups become a very desirable as a control within a unified computing context.

Named Initiator Access

Enabling named initiator to target using unauthenticated access with COMSTAR and VMware iSCSI services is a relatively simple operation. Let’s examine how this method controls initiator access.

We will define two host groups, one for production esx hosts and one for test esx hosts.

# stmfadm create-hg prod-esx1

# stmfadm create-hg test-esx1

With these host groups defined we individually assign LU’s views to the host groups and then we define any initiator to be a member of one of the host groups to which it would only see the views which belong to the host group and additionally any views assigned to the default all group.

To add a host initiator to a host group, we must first create it in the port provider of choice which in this case is the iSCSI port provider.

# itadm create-initiator iqn.1998-01.com.vmware:vh1.1

Once created the defined initiator can be added to a host group.

# stmfadm add-hg-member -g prod-esx1 iqn.1998-01.com.vmware:vh1.1

An ESX host initiator with this iqn name can now attach to our COMSTAR targets and will see any LU views that are added to the prod-esx1 host group. But there are still some issues here, for example any ESX host with this initiator name will be able to connect to our targets and see the LUs. This is where CHAP can help to improve access control.

Adding CHAP Authentication on the iSCSI Target

Adding CHAP authentication is very easy to accomplish, we simply need to set a chap user name and secret on the respective iSCSI target. Here is an example of its application.

# itadm modify-target -s -u tcuid1 iqn.2009-06.target.ss1.1

Enter CHAP secret:
Re-enter secret:

The CHAP secret must be between 12 and 255 characters long. The addition of CHAP allows us to further reduce any risks of a potential storage security event. We can define an additional target and they can have a different chap user names and or secrets.

CHAP is more secure when used in a mutual authentication back to the source initiator which is my preferred way to implement it on ESX 4 (ESX 3 does not support mutual chap). This mode does not stop a successful one-way authentication from an initiator to the target, it allows the initiator to request that the target host system iSCSI services must authenticate back to the initiator which provides validation that the target is indeed the correct one. Here is an example of the target side initiator definition that would provide this capability.

# itadm modify-initiator -s -u icuid1 iqn.1998-01.com.vmware:vh1.1

Enter CHAP secret:
Re-enter secret:

Configuring the ESX 4 Software iSCSI Initiator

On the ESX 4 host side we need to enter our initiator side CHAP values.

 

Be careful here, there are three places we can configure CHAP elements. The general tab allows a global point of admin where any target will inherit those entered values by default where applicable e.g. target chap settings. The the dynamic tab can override the global settings and as well the static tab overrides the global and dynamic ones. In this example we are configuring a dynamically discovered target to use mutual (aka bidirectional) authentication.

In closing CHAP is a reasonable method to ensure that we correctly grant initiator to target connectivity assignments in an effort to promote better integrity and availability. It does not however provide much on the side of confidentially for that we need more complex solutions like IPSec.

Hope you found this blog interesting.

Regards,

Mike

Tags: authentication, CHAP, comstar, esx, initiator, iscsi, itadm, Mutual, target, VMware

This entry was posted on Monday, June 29th, 2009 at 6:40 PM and is filed under Security, Storage, VMware. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Site Contents: © 2009  Mike La Spina